Time and date
CONSTRUCTION DIRECTORY
Sensors for Safety Ltd
Sensors for Safety Ltd Contact Details
Address
Knaresborough Technology Park
Manse Lane
Manse Lane
Knaresborough
HG5 8LF
Opening Hours
Monday
08:30-17:30
Tuesday
08:30-17:30
Wednesday
08:30-17:30
Thursday
08:30-17:30
Friday
08:30-17:30
Saturday
Closed
Sunday
Closed
Other Dates
Sensors for Safety Ltd are always available via e-mail sales@sensorsforsafety.co.uk where we will reply to your request as quickly as possible.
About Sensors for Safety Ltd
Gas Detection Equipment
Sensors for Safety Ltd gas detection equipment solutions for all eventualities. Protection from gas hazards is not a one size fits all proposition. Systems are designed to provide the appropriate level of protection from the basic one channel, one gas system to the most complex multi-channel, multi-gas system.
The use of a gas detection system, with appropriate action taken if dangerous levels of gas are detected can help to prevent explosions, injury to workers or exposure to toxic gases. Action can be taken and initiated automatically by the gas detection control panel to help prevent the gas level from rising further. This action could be the turning on of a ventilation fan, shut off of gas valves, shutting down a process or audible and visual alarms to alert or evacuate personnel.
Gas detection equipment can be purchased directly from our online store or if you prefer, please contact us with your enquiry or specific needs and we will be pleased to offer our proposals and most cost effective solution.
Gas Detection Equipment for the following Industries:
Sensors for Safety Ltd supply a range of gas detection products to cover every application, ranging from a single channel, single gas detection system up to multi-channel multi-gas gas detection systems. We cover the complete range of flammable, toxic and asphyxiant gases for use in all industries.
Standalone Gas Detection System with Integrated Sensor
Sensors for Safety Ltd supply a range of standalone gas detection products to cover every application. We cover the complete range of flammable, toxic and asphyxiant gases for use in all industries. Feel free to browse through the data sheets or contact us for a no obligation quotation.
Portable gas detectors
Sensors for Safety Ltd supply and support all makes and types of portable gas detectors. Our latest addition is the low cost fully featured Senko SGT single gas detector - available to buy directly from our online store
Gas Sensors
At Sensors for Safety Ltd our expertise covers gases across the full range of industries.
Gas Sampling Systems - Sensors for Safety Ltd
At Sensors for Safety we have a number of different gas sampling systems from single line to multi-point which sample from one gas to eight gases within the same control panel.
Sounders Beacons and Alarm Panels
At Sensors for Safety Ltd we offer a range of andon stack lights, sounders, beacons and warning devices.
Power Supplies
At Sensors for Safety Ltd we offer a range of power supplies and battery backups.
Sensors for Safety Ltd gas detection equipment solutions for all eventualities. Protection from gas hazards is not a one size fits all proposition. Systems are designed to provide the appropriate level of protection from the basic one channel, one gas system to the most complex multi-channel, multi-gas system.
The use of a gas detection system, with appropriate action taken if dangerous levels of gas are detected can help to prevent explosions, injury to workers or exposure to toxic gases. Action can be taken and initiated automatically by the gas detection control panel to help prevent the gas level from rising further. This action could be the turning on of a ventilation fan, shut off of gas valves, shutting down a process or audible and visual alarms to alert or evacuate personnel.
Gas detection equipment can be purchased directly from our online store or if you prefer, please contact us with your enquiry or specific needs and we will be pleased to offer our proposals and most cost effective solution.
Gas Detection Equipment for the following Industries:
- Automotive Industry
- Boiler Rooms / Plant Rooms
- Brewing
- Car Parks
- Chemical and Petro-Chemical
- Commercial Kitchens
- Education Establishments
- Facilities Management
- Food & Drinks
- Laboratories
- Medical and MRI
- Swimming Pools & Leisure
- Switchgear / HV Transformers
- Universities
- Waste and Recycling
- Water and Waste Water
Sensors for Safety Ltd supply a range of gas detection products to cover every application, ranging from a single channel, single gas detection system up to multi-channel multi-gas gas detection systems. We cover the complete range of flammable, toxic and asphyxiant gases for use in all industries.
Standalone Gas Detection System with Integrated Sensor
Sensors for Safety Ltd supply a range of standalone gas detection products to cover every application. We cover the complete range of flammable, toxic and asphyxiant gases for use in all industries. Feel free to browse through the data sheets or contact us for a no obligation quotation.
Portable gas detectors
Sensors for Safety Ltd supply and support all makes and types of portable gas detectors. Our latest addition is the low cost fully featured Senko SGT single gas detector - available to buy directly from our online store
Gas Sensors
At Sensors for Safety Ltd our expertise covers gases across the full range of industries.
Gas Sampling Systems - Sensors for Safety Ltd
At Sensors for Safety we have a number of different gas sampling systems from single line to multi-point which sample from one gas to eight gases within the same control panel.
Sounders Beacons and Alarm Panels
At Sensors for Safety Ltd we offer a range of andon stack lights, sounders, beacons and warning devices.
Power Supplies
At Sensors for Safety Ltd we offer a range of power supplies and battery backups.
Gallery
|
Click to close
|
News
23/05/2023
Evikon gas detection products
Sensors for Safety Ltd are proud to have been chosen as a UK distributor of the full Evikon gas detection product range. To find out more about this new range of products please call the office 01423 206360 or drop an email to: sales@sensorsforsafety.co.uk
29/04/2022
Focus on Parking Garages
Parking Garages and Carbon Monoxide Gas Detectors
Parking garages, Ambulance Stations, Parcel Depots, Maintenance Bays, and other areas that will have vehicles running in an enclosed space must be ventilated to prevent the build-up of carbon monoxide and other dangerous gases (eg; nitrogen dioxide) from vehicle exhaust fumes.
In the past these areas had been fitted with very large ventilation fans that would run 24 hours a day.
Over the past 20 years, we have begun to focus heavily on energy efficiency, and the electricity that is needed to run these big fans at all times is costly and wasteful.
To combat this excess energy usage the industry has developed an alternate strategy to ventilate these enclosed spaces. This involves actually measuring the amount of Carbon Monoxide (CO) or Nitrogen Dioaxide (NO2) in the garage, and only operating the fan at full speed when it is actually necessary.
Building owners can see energy savings of 80-90% when these systems are operated as such.
How do parking garage sensors function?
These sensors operate by electro-chemical reaction. That is, when the sensor is contacted by Carbon Monoxide (CO) or Nitrogen Dioxide (NO2) a change in voltage happens which triggers the fan to activate. As the sensor is contacted by gas over months or years, these chemicals begin to wear out and they no longer trigger the fan at the proper concentration of hazardous gases. For that reason, the manufacturers require that the sensors be calibrated every 6-12 months and replaced every 2-7 years. If this doesn’t happen, then we can either create a safety issue due to gas build up (and therefore a real possibility of people being exposed to high levels of gas), or lose out on energy saving by having the fan read a fault and always operate.
In the field, we are finding that 90+% of the sensors that were installed have never been calibrated, and 50-75% have completely failed and are no longer working at all.
On top of this EH40/2005 (Third Edition) published 2018, guidance has reduced the trigger levels to 30ppm for carbon monoxide whereas older systems had a trigger level of 50ppm.
In our experience, the first thing that HSE will look for in the case of an incident is whether the gas detection system has been maintained and if so where is the paperwork to back it up – they do not accept the excuse that you were not aware of the requirements for testing – the liability is on you.
How are toxic gas detectors calibrated?
Getting these systems up and running again is a fairly inexpensive and painless process. Our technicians will visit the site and assess the quantity, brand, and location of each Carbon Monoxide or Nitrogen Dioxide sensor. They will apply the proper span gases and run through the manufacturer’s calibration procedures. Sensors that pass calibration will have a certificate generated and calibration label affixed. The client is then provided with a calibration report and ongoing operations and maintenance plan for this system
Sensors that do not pass calibration, are expired, or otherwise damaged can easily by replaced with the same brand or upgraded to a modern version. Our field technicians will recommend the most durable and cost-effective solution to the facilities manager.
Parking garages, Ambulance Stations, Parcel Depots, Maintenance Bays, and other areas that will have vehicles running in an enclosed space must be ventilated to prevent the build-up of carbon monoxide and other dangerous gases (eg; nitrogen dioxide) from vehicle exhaust fumes.
In the past these areas had been fitted with very large ventilation fans that would run 24 hours a day.
Over the past 20 years, we have begun to focus heavily on energy efficiency, and the electricity that is needed to run these big fans at all times is costly and wasteful.
To combat this excess energy usage the industry has developed an alternate strategy to ventilate these enclosed spaces. This involves actually measuring the amount of Carbon Monoxide (CO) or Nitrogen Dioaxide (NO2) in the garage, and only operating the fan at full speed when it is actually necessary.
Building owners can see energy savings of 80-90% when these systems are operated as such.
How do parking garage sensors function?
These sensors operate by electro-chemical reaction. That is, when the sensor is contacted by Carbon Monoxide (CO) or Nitrogen Dioxide (NO2) a change in voltage happens which triggers the fan to activate. As the sensor is contacted by gas over months or years, these chemicals begin to wear out and they no longer trigger the fan at the proper concentration of hazardous gases. For that reason, the manufacturers require that the sensors be calibrated every 6-12 months and replaced every 2-7 years. If this doesn’t happen, then we can either create a safety issue due to gas build up (and therefore a real possibility of people being exposed to high levels of gas), or lose out on energy saving by having the fan read a fault and always operate.
In the field, we are finding that 90+% of the sensors that were installed have never been calibrated, and 50-75% have completely failed and are no longer working at all.
On top of this EH40/2005 (Third Edition) published 2018, guidance has reduced the trigger levels to 30ppm for carbon monoxide whereas older systems had a trigger level of 50ppm.
In our experience, the first thing that HSE will look for in the case of an incident is whether the gas detection system has been maintained and if so where is the paperwork to back it up – they do not accept the excuse that you were not aware of the requirements for testing – the liability is on you.
How are toxic gas detectors calibrated?
Getting these systems up and running again is a fairly inexpensive and painless process. Our technicians will visit the site and assess the quantity, brand, and location of each Carbon Monoxide or Nitrogen Dioxide sensor. They will apply the proper span gases and run through the manufacturer’s calibration procedures. Sensors that pass calibration will have a certificate generated and calibration label affixed. The client is then provided with a calibration report and ongoing operations and maintenance plan for this system
Sensors that do not pass calibration, are expired, or otherwise damaged can easily by replaced with the same brand or upgraded to a modern version. Our field technicians will recommend the most durable and cost-effective solution to the facilities manager.
26/04/2021
S4S Gaswarden GR
The latest addition to our S4S Gaswarden family is the S4S Gaswarden GR. The unit is a stand alone sensor which is supplied with a 230VAC mains adapter meaning that you can just plug it in and it is ready to use. The unit comes with a bright colour changing 30mm LED (Green for healthy, Red for gas) and a built in mutable sounder. The unit also has a test function to ensure confidence for the end user.
19/07/2019
S4S Guardian 1 system plays vital safety role in chemical spill
Case Study:
We were recently called to Repton Sports Centre in Derbyshire to quote for a replacement gas detection system - to replace an obsolete system that the manufacturer was wanting over £1000.00 just to turn up and look at!
We supplied, installed and commissioned one of our S4S Guardian 1 control systems complete with our Guardian Point Chlorine (CL2) gas sensor.
Two weeks after being installed there was a major incident where Chlorine gas was released causing several people to be treated for the effects of Chlorine.
If you would like a quote for a service of your existing system or to supply install and commission a new system please contact us for a no obligation quotation.
We are able to offer Maintenance contracts on all types and makes of gas detection including (but not limited to) Crowcon Detection Instruments, Drager, GDS Technologies, GMI, Honeywell, IGD, MSA, Seitron, Sensitron, Oldham & Zellweger.
As an experienced gas detection maintenance service provider, Sensors for Safety Ltd provides a streamlined management structure and delivers increased efficiency and value for money.
We were recently called to Repton Sports Centre in Derbyshire to quote for a replacement gas detection system - to replace an obsolete system that the manufacturer was wanting over £1000.00 just to turn up and look at!
We supplied, installed and commissioned one of our S4S Guardian 1 control systems complete with our Guardian Point Chlorine (CL2) gas sensor.
Two weeks after being installed there was a major incident where Chlorine gas was released causing several people to be treated for the effects of Chlorine.
If you would like a quote for a service of your existing system or to supply install and commission a new system please contact us for a no obligation quotation.
We are able to offer Maintenance contracts on all types and makes of gas detection including (but not limited to) Crowcon Detection Instruments, Drager, GDS Technologies, GMI, Honeywell, IGD, MSA, Seitron, Sensitron, Oldham & Zellweger.
As an experienced gas detection maintenance service provider, Sensors for Safety Ltd provides a streamlined management structure and delivers increased efficiency and value for money.
20/05/2019
S4S Guardian Plus - The most versatile gas detection system
On a recent install of our S4S Guardian addressable gas detection system the spec for the job changed several times. With a conventional system this would have been a major problem, but with the advanced design of the S4S Guardian addressable system the changes required were very simple to administer.
The system: 15pt Natural Gas system for a large Hotel covering areas where the gas pipe runs through various rooms in to kitchens.
The install required over 200 metres of cable - a conventional gas detection system would have been nearer to 1000 metres.
The spec changed part way through the install where it was decided that each area required its own beacon if gas is detected in that area. We were able to utilise the sensor network to install addressable relays to indicate when sensors in a particular area where triggered. Again this saved 100's of metres of extra cable and all the man hours required to install.
The system: 15pt Natural Gas system for a large Hotel covering areas where the gas pipe runs through various rooms in to kitchens.
The install required over 200 metres of cable - a conventional gas detection system would have been nearer to 1000 metres.
The spec changed part way through the install where it was decided that each area required its own beacon if gas is detected in that area. We were able to utilise the sensor network to install addressable relays to indicate when sensors in a particular area where triggered. Again this saved 100's of metres of extra cable and all the man hours required to install.
01/01/2019
Senko SGT disposable low cost single gas detector
Senko SGT single gas detector is the latest gas detection monitor to be added to our online store.
The Senko SGT is a low cost fully featured 2 year single gas monitor for the following gases:
Oxygen
Carbon Monoxide
Hydrogen Sulphide
Hydrogen
Ammonia
Sulphur Dioxide
HIGHLIGHTS :
• Lightweight & Compact
• Stores up to 30 events
• Maintenance Free
• 2 years of use
• IP-67
• Fast bump tests with Docking Station
• Visual, Acoustic and Vibration alarms
To launch our new product we are currently offering special discounts - either call our friendly sales team on 01423 206360 or visit our website @ https://store.sensorsforsafety.co.uk/products/senko-sgt-single-gas-detector for more details and to buy directly.
The Senko SGT is a low cost fully featured 2 year single gas monitor for the following gases:
Oxygen
Carbon Monoxide
Hydrogen Sulphide
Hydrogen
Ammonia
Sulphur Dioxide
HIGHLIGHTS :
• Lightweight & Compact
• Stores up to 30 events
• Maintenance Free
• 2 years of use
• IP-67
• Fast bump tests with Docking Station
• Visual, Acoustic and Vibration alarms
To launch our new product we are currently offering special discounts - either call our friendly sales team on 01423 206360 or visit our website @ https://store.sensorsforsafety.co.uk/products/senko-sgt-single-gas-detector for more details and to buy directly.
20/12/2018
Sensors for Safety Ltd – Official Distributor for Senko gas detection products
Sensors for Safety Ltd are please to announce that they have been selected as official distributor for Senko.co.kr gas detection equipment.
Senko Korea was established in 2004 and is focused on producing portable and fixed gas detection equipment along with electro-chemical, catalytic and infra-red gas sensors.
As official distributors we are able to offer full back up support on all Senko products.
Senko Korea was established in 2004 and is focused on producing portable and fixed gas detection equipment along with electro-chemical, catalytic and infra-red gas sensors.
As official distributors we are able to offer full back up support on all Senko products.
22/08/2018
Calibration & Bump Test Gas
Sensors for Safety Ltd can now supply a full range of calibration and bump test gases for use with all fixed and portable gas monitors (delivery to UK mainland only until further notice). We also supply gas regulators and complete calibration kits for all makes and models of gas detection equipment. Please feel free to call on 01423 206360 or e-mail: sales@sensorsforsafety.co.uk
22/06/2018
NEW - Low cost gas detection system
Sensors for Safety Ltd are proud to announce their newest low cost gas detection system to be added to their portfolio.
The GUARDIAN LITE addressable system is designed to be used in conjunction with BMS control panels and Fire Alarm control panels but can also be used as a standalone system. The system is designed to be used in all applications including Zone 1 and Zone 2 areas. With various options the Guardian Lite can be used as an addressable network of up to 64 sensors for flammable, toxic and asphyxiant gases. Additional panels can be added at various locations to enable real time readings prior to entry in to the area. Typical applications are Boiler Rooms, Plant Rooms, Car Parks, Loading Bays, Laboratories, Gas Bottle Storage, CHP's, Biogas Plants, Warehouse Storage Areas, Swimming Pool Plant Rooms, Ambulance Stations, Battery Charging Areas and many more.
The Guardian Lite can also be used as a sample system with the addition of a close coupled sample pump making it a very simple system to install.
For more information, please call 01423 206360 and speak to our friendly sales team.
The GUARDIAN LITE addressable system is designed to be used in conjunction with BMS control panels and Fire Alarm control panels but can also be used as a standalone system. The system is designed to be used in all applications including Zone 1 and Zone 2 areas. With various options the Guardian Lite can be used as an addressable network of up to 64 sensors for flammable, toxic and asphyxiant gases. Additional panels can be added at various locations to enable real time readings prior to entry in to the area. Typical applications are Boiler Rooms, Plant Rooms, Car Parks, Loading Bays, Laboratories, Gas Bottle Storage, CHP's, Biogas Plants, Warehouse Storage Areas, Swimming Pool Plant Rooms, Ambulance Stations, Battery Charging Areas and many more.
The Guardian Lite can also be used as a sample system with the addition of a close coupled sample pump making it a very simple system to install.
For more information, please call 01423 206360 and speak to our friendly sales team.
18/05/2018
S4S Gaswarden - Low Cost Gas Detection
S4S Gaswarden - Low Cost Gas Detection
Sensors for Safety Ltd are pleased to announce the addition of the Gaswarden gas detection system to their Online Webshop.
The S4S Gaswarden
The S4S Gaswarden gas leak detection system features remote sensors connected to the main control unit via a 3 core cable network. The control unit is an advanced design using the latest technology and provides a high integrity system whilst offering a significant cost saving over conventional gas alarm systems.
Standard sensors for use in commercial and light industrial applications such as laboratories, workshops, boiler plant rooms etc are available for monitoring toxic, flammable, oxygen or refrigerant gases. Each gas sensor continuously monitors the atmosphere for any hazardous conditions, on detection of gas the sensor will indicate the gas level status A1, A2, A3 by LED indication and sounder. Information received by the control panel from the sensor is then displayed, indicating the zone, gas type and alarm status. Alarm levels that are exceeded are then able to activate user selectable relays and appropriate control actions.
Visit: https://store.sensorsforsafety.co.uk/t/gaswarden-gas-alarm
Sensors for Safety Ltd are pleased to announce the addition of the Gaswarden gas detection system to their Online Webshop.
The S4S Gaswarden
The S4S Gaswarden gas leak detection system features remote sensors connected to the main control unit via a 3 core cable network. The control unit is an advanced design using the latest technology and provides a high integrity system whilst offering a significant cost saving over conventional gas alarm systems.
Standard sensors for use in commercial and light industrial applications such as laboratories, workshops, boiler plant rooms etc are available for monitoring toxic, flammable, oxygen or refrigerant gases. Each gas sensor continuously monitors the atmosphere for any hazardous conditions, on detection of gas the sensor will indicate the gas level status A1, A2, A3 by LED indication and sounder. Information received by the control panel from the sensor is then displayed, indicating the zone, gas type and alarm status. Alarm levels that are exceeded are then able to activate user selectable relays and appropriate control actions.
Visit: https://store.sensorsforsafety.co.uk/t/gaswarden-gas-alarm
08/04/2018
Gas Detection for Safety
It has been another busy week for the sales and service teams at Sensors for Safety Ltd.
The week started with confirmation of some large system orders for a national courier company to monitor Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) in their loading bays to control the exhaust emissions from their fleet of vehicles. Our low cost S4S Gaswarden gas detection system proved to be ideal for this application.
https://store.sensorsforsafety.co.uk/t/gaswarden-gas-alarm
Meanwhile, our service team were busy installing one of our Gasvac systems in a warehouse to monitor for leaks of Volatile Organic Compounds (VOCs) and Methanol.
https://store.sensorsforsafety.co.uk/products/gasvac-single-line-multipoint-sampling-system
The week started with confirmation of some large system orders for a national courier company to monitor Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) in their loading bays to control the exhaust emissions from their fleet of vehicles. Our low cost S4S Gaswarden gas detection system proved to be ideal for this application.
https://store.sensorsforsafety.co.uk/t/gaswarden-gas-alarm
Meanwhile, our service team were busy installing one of our Gasvac systems in a warehouse to monitor for leaks of Volatile Organic Compounds (VOCs) and Methanol.
https://store.sensorsforsafety.co.uk/products/gasvac-single-line-multipoint-sampling-system
09/01/2018
Sensors for Safety Ltd appointed distributor for Coster Controls gas detection & gas valves
Sensors for Safety Ltd are proud to have been appointed distributor for Coster Controls gas detection and gas valves. We can supply all Coster gas detection equipment from the RFG65 range with SRS sensors to UMD950 with IGS sensors. Also we can supply the domestic range of flammable gas and carbon monoxide detectors which are used extensively in high rise accommodation.
We are currently offering customers a service exchange on obsolete RFG751, RFG752, RFG753, RFG782, RFG100 control panels and SGR300/M, SGR300/P and SGR301 sensors.
For more details: https://store.sensorsforsafety.co.uk/t/coster-gas-detection
If you require any further information please do not hesitate to contact our sales team on 01423 206360 or sales@sensorsforsafety.co.uk
We are currently offering customers a service exchange on obsolete RFG751, RFG752, RFG753, RFG782, RFG100 control panels and SGR300/M, SGR300/P and SGR301 sensors.
For more details: https://store.sensorsforsafety.co.uk/t/coster-gas-detection
If you require any further information please do not hesitate to contact our sales team on 01423 206360 or sales@sensorsforsafety.co.uk
06/08/2017
New GasVac longline multipoint sampling system
Sensors for Safety Ltd are pleased to announce the introduction of our GasVac longline multipoint gas sampling system to our Webshop. The GasVac sampling system uses a unique micropore tube to sample from multiple locations at the same time, thus avoiding delays where standard sample systems sample sequentially over a period of time. For more information, please visit https://store.sensorsforsafety.co.uk/products/gasvac-single-line-multipoint-sampling-system
Products & Services
Evikon gas detection equipment
Hydrogen gas monitors
Oxygen Enrichment
Distillery Ethanol gas detection
Biogas detector
Chlorine Fumes
Chlorine Gas
Swimming pool gas detection
Chlorine Dioxide (CLO2) gas detection
Brewery gas detection
Ozone (O3) gas detector
Ammonia (NH3) gas detector
Ethylene Oxide (ETO) gas detector
Silane gas detector
Coster gas detection
Coster gas detector
Portable gas detector
Plant Room gas detector
Boiler Room gas detector
Hydrogen (H2) gas detector
LPG gas detector
Natural gas (CH4) detector
PID (VOC) gas detector
Refrigerant gas detector
Carbon Dioxide (CO2) gas detector
Carbon Monoxide (CO) gas detector
Nitrogen (N2) gas detector
Oxygen (O2) gas detector
Sulphur Dioxide (SO2) gas detector
Chlorine (CL2) gas detector
Gas Detector Alarm
Natural Gas Alarm
Gas Detection Instruments
SF6 Gas Detector
Gas Sensing
CO Monitors
Toxic Gas Sensor
Flammable Gas Sensor
Carbon Monoxide Alarm
CO alarm
Gas Alarm System
Gas Alarm
Gas Detection
Team
| Name | Role | Telephone | |
| Peter Gartside | Sales / Service Manager | peter.gartside@sensorsforsafety.co.uk | 01423 206360 |
| James Gartside | Sales Executive | james.gartside@sensorsforsafety.co.uk | 01423 206360 |
Location Map
Sensors for Safety Ltd Serves The Following Areas
Find Sensors for Safety Ltd in
Sensors for Safety Ltd General Description
Gas detection equipment
